| Item | Description | Picture | Price | Qty | | Part: 20101
| Hermle spade hands 1-3/4 minute hand
Black spade hands for Hermle movements and others. With bushings. The minute hand is 1-3/4" long as measured from the center of the square mounting hole to the tip. |  | $2.75 | |
|
Part: 10617
| Kitchen clock door latch - short
Brass plated steel kitchen clock door latch is 5/16" wide x 1-1/4" long. |  | $1.00
12/$0.85 | |
|
Part: 30459
| Power nutdriver set
14-piece set for your power tool. 7 inch sizes on one end (3/16", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16") and 7 metric sizes on the other end (5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 12mm). China |  | $5.00 | |
|
Part: 30460
| Eyeglass & watch screw assortment
250-pc assortment includes miscellaneous miniature screws for eyeglasses, winding and quartz watches (including Casio watch backs), and nose pads, In a 12-compartment box, each marked with the contents. India. |  | $9.00 | |
|
Part: 15660
| Escape wheel tooth straightener
Webster unit holds and straightens escape wheel teeth. Includes instructions & accessories. |  | $243.50 | |
|
Part: 30461
| Simplify & save: start a clock repair sh
19-page soft cover booklet identifies & illustrates what you need to start a clock repair business & how to lay out your work space. Identifies vendors & anticipated cash outlay. By Tom Seaman.
|  | $12.50 | |
|
Part: 10762
| Screw holding screwdriver-slotted
Grips small, hard-to-hold slotted screws in claws while tightening or loosening. 4-3/4" long. Aluminum knurled handle. Plunger action. 2.2mm blade. India.
|  | $9.00 | |
|
Part: 30472
| Hand held scale
Designed for luggage, but perfectly suitable to weigh clock weights of all types up to 75 lbs. max.
STOP AND LOCK scale has dial stops and locks at weight for easy reading. Resets to zero with a twist. Comes with a tape measure. Metal & plastic construction. 4" x 3" x 1-1/2".
|  | $8.00 | |
|
Part: 15461
| Webster depthing tool
Lay out centers on clock plates when building or repairing. Cast metal frame with center pins, pointed runners, and rods. Maximum 2-3/4" between centers. Cones, trumpets and runner adapter included. |  | $188.50 | |
|
Part: 30465
| Waltham #37 mainspring
Denison #37 (37 x 1 x 30)converts to:
- .460/.465" Width
- .022/.023" Thickness
- 30" long
- Hole at each end
Waltham factory number 2232.
This spring was used in many different applications, including car clocks, aircraft clocks, travel clocks, deck clocks, ships clocks, etc. |  | $15.00
3/$14.50 | |
|
Part: 30473
| Digital luggage scale
Designed for luggage, but perfectly suitable to weigh clock weights of all types up to 75 lbs. max.
Ergonomic digital scale has backlit digital readout and locks into display until cleared. Use top for lighter-weight items and side grips for heavier items. Includes tape measure. Hook tucks away. Runs on 2-AAA batteries, included. Molded plastic. 5" x 6-1/4" x 1".
|  | $20.50 | |
|
Part: 11626
| Cast flat back eagle-small
Flat-backed for easy application to cases. 2 mounting holes. Antique brass finish.
13/16" T x 2-3/16" W |  | $2.00 | |
|
Part: 12385
| Cast flat back eagle-large
Flat-backed for easy application to cases. 2 mounting holes. Antique brass finish.
1-3/4" T x 3-1/4" W |  | $2.50 | |
|
Part: 12697
| Screw holding screwdriver-philips
Grips small, hard-to-hold philips-drive screws in claws while tightening or loosening. 4-3/4" long. Aluminum knurled handle. Plunger action. India.
|  | $9.00 | |
|
Part: 30466
| American size key gauge
Indicates the size of the key in millimeter measurements. 18 different sizes. Note: Swiss sizes run smaller than American sizes.
-American Sizes #000 Through #18 (2.00mm Through 6.00mm)-PART #30466
(For Swiss Sizes #000 Through #15 (1.75mm Through 6.00mm) - ORDER PART #19258)
|  | $25.00 | |
|
Part: 30467
| 37 Piece nickel silver wire assortment
37 piece assortment in 6" lengths in a drill gauge size range of 20 to 70 (.028" to .161"). Many uses. India.
|  | $8.00 | |
|
Part: 29231
| 3-Piece mini pliers set
3" long for small work. Includes a long nose, round nose, and flat nose pliers, all with spring action. Plastic storage pouch. Rubberized handles. Made in Pakistan. |  | $6.50 | |
|
Part: 30462
| Windles clock oil
General purpose medium viscosity oil for all clocks. Great for marine & brass instruments. Resists deposit build-up & does not gum up or evaporate. Helps prevent oxidation & corrosion. Good in cold conditions. 50 ml bottle. |  | $12.50 | |
|
Part: 30453
| Mini metal watch press
Sturdy cast base with 6 nylon dies (14mm. 20mm, 28mm, 32mm, 36mm, 37mm). Will not scratch crystals or cases. India. |  | $17.50 | |
|
Part: 30463
| Windles watch oil
General purpose fine viscosity oil for long lasting lubrication of watches & other fine precision mechanical instruments. Resists deposit build-up and does not gum up or evaporate. Helps prevent oxidation & corrosion. Good in cold conditions.
25 ml bottle. |  | $12.50 | |
|
Part: 30464
| Windles turret oil
Heavy viscosity general purpose oil for larger clocks. Suitable for other applications where quality oil is required. Excellent thermal stability. Inhibits oxidation & corrosion. Long lasting for the protection of turret clocks and other mechanisms. 100 ml bottle. |  | $12.50 | |
|
Part: 11448
| Sword i-shaft hands for qtz mvmts
For use on quartz movements. The oblong mounting hole is .115" wide x .160" long. Black metal sword hands have a 3-1/4" long minute hand as measured from the center of the mounting hole to the tip. Combine with other I-shaft hands for quartz movements for quantity discounts. Fits 6-1/2" to 7" dials. |  | $0.50
12/$0.45
50/$0.40 | |
|
Part: 11534
| Spade i-shaft hands for qtz mvmts
For use on quartz movements. The oblong mounting hole is .115" wide x .160" long. Black metal spade style hands have a 5-1/8" long minute hand as measured from the center of the mounting hole to the tip. Combine with other I-shaft hands for quartz movements for quantity discounts. Fits 10" to 11" dials. |  | $0.50
12/$0.45
50/$0.40 | |
|
Part: 11535
| Spade i-shaft hands for qtz mvmts
For use on quartz movements. The oblong mounting hole is .115" wide x .160" long. Black metal spade style hands have a 1-5/16" long minute hand as measured from the center of the mounting hole to the tip. Combine with other I-shaft hands for quartz movements for quantity discounts. Fits 2-1/2" to 3" dials. |  | $0.50
12/$0.45
50/$0.40 | |
|
Part: 11536
| Serpentine i-shaft hds for qtz mvmts
For use on quartz movements. The oblong mounting hole is .115" wide x .160" long. Black metal serpentine style hands have a 3-7/16" long minute hand as measured from the center of the mounting hole to the tip. Combine with other I-shaft hands for quartz movements for quantity discounts. Fits 7" to 7-1/2" dials. |  | $0.50
12/$0.45
50/$0.40 | |
|
Part: 12707
| Tapered i-shaft hds for qtz mvmts
For use on quartz movements. The oblong mounting hole is .115" wide x .160" long. Black metal tapered hands have a 4-3/4" long minute hand as measured from the center of the mounting hole to the tip. Combine with other I-shaft hands for quartz movements for quantity discounts. Fits 9-1/2" to 10" dials. |  | $0.50
12/$0.45
50/$0.40 | |
|
Part: 12708
| 1-1/4 Squiggly 2nd hand for qtz mvmts
Black sweep second hand for most quartz movements measures 1-1/4" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks. |  | $0.40
12/$0.35
50/$0.30 | |
|
Part: 12709
| 2-9/16 Special 2nd hand for qtz mvmts
Black sweep second hand for most quartz movements measures 2-9/16" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks. |  | $0.40
12/$0.35
50/$0.30 | |
|
Part: 13154
| 2-3/8 Special 2nd hand for qtz mvmts
Black sweep second hand for most quartz movements measures 2-3/8" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks. |  | $0.40
12/$0.35
50/$0.30 | |
|
Part: 13155
| 1-1/4 Second hand for qtz mvmts
Black sweep second hand for most quartz movements measures 1-1/4" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks. |  | $0.40
12/$0.35
50/$0.30 | |
|
Part: 13740
| Black on brass 2-3/4 bob for qtz mvmts
Striking black scrolled design silk screened on brass finished bob. 2-3/4" diameter with back slot to accommodate 5/16" wide pendulum rods. |  | $4.00 | |
|
Part: 13833
| White on brass 2-3/4 bob for qtz mvmts
Striking white scrolled design silk screened on brass finished bob. 2-3/4" diameter with back slot to accommodate 5/16" wide pendulum rods. |  | $4.00 | |
|
Part: 14906
| 4-PC. Set of plastic arabic numerals
4-number set in gold styrene against a black background. 1-2" tall x 1/8" thick. Self adhesive. Comes with a template for easy numeral placement. |  | $1.00 | |
|
Part: 14934
| Music box mounting pad
Double sided adhesive pad is used for mounting music boxes. 1-3/4" square with precut hole for key. |  | $0.50 | |
|
Part: 30474
| Quartz movement module kit
Ever wonder how a quartz movement works? Want to know how to service one? This kit will help. It includes an unassembled quartz clock movement, mounting hardware, hour, minute, and second hands, an “AA” battery 5-7/8” styrene dial, and illustrated assembly instructions. Great instructional tool for creating a working quartz movement.
|  | $4.50 | |
|
